MATEK Mateksys F405 HDTE UAV Drone BetaFlight INAV ArduPilot FC Flight Controller for FPV RC Multirotor Airplane Fixed-wing Drones|1Pcs

Description

• STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
• InvenSense the 3rd generation IMU ICM42688-P
• 9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX.
• 8motors+3servos in INAV/BF multirotor mixer.
• 2x SH1.0_8pin connector for PnP with 2x 4in1 ESC
• 1x SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
• USB pin breakout for connecting to external USB adapter.

• MCU: STM32F405RGT6
  
• IMU: ICM42688-P
  
• OSD: AT7456E, DJI OSD
  
• Baro: SPL06-001 (I2C)
  
• Blackbox: 16M-byte Flash memory
  
• 6x UARTs, 1x Softserial_Tx option
  
• 12x PWM outputs (8x Dshot)
  
• 1x I2C
  
• 4x ADC (VBAT, Current, RSSI, Airspeed)
  
• 2x PINIO
  
• 2x SH1.0_8pin connector for 4in1 ESC
  
• 1x SH1.0_6pin connector for HD System(Caddx Vista & Air Unit)
  
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  
• 9~16V(Vxs) output ON/OFF switchable
  Dual analog camera signal switchable

• ArduPilot: MatekF405-TE
  
• INAV: MATEKF405TE
  
• BetaFlight: MATEKF405TE

• Input: 9~60V (3~12S LiPo)
  
• BEC: 5V 1.5A
  
• BEC: Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
  
• Battery Voltage Sensor: 1K:20K (INAV scale 2100, BF scale 210)
  
• No Current Sensor built-in, supports external current sensor of PDB/4in1